Poetry In Humans Essays - Run, 9, Szd Speech,

Poetry In Humans I plan to play a lot of basketball this summer. We will probably end up going to nationals in Orlando, which would be a lot of fun. I will lift a lot of weights to get stronger also. Other than playing basketball, I will be going to Oregon and visiting friends and family. I should spend about 3 weeks there. I will obviously work on my tan. I plan to work on learning the bass guitar. That should be a lot of fun, because I have a lot of musical talent that I haven't had the time to use. I think that peer-pressure for me right now isn't bad at all. I am not being pushed into drugs heavily, or anything else that is illegal. The pressure to perform well in basketball is high right now. I am not liking that, I feel that I will probably take a break from playing ball relatively soon. Because of my peer-pressure in basketball, I have not had much time to do school work. It get frustrating when your teachers get mad at you for not doing your work, when it really isn't your fault. I think I have put lots of work into my school year. I will stay up all night sometimes to do projects, like I am doing right now. Considering I have basketball, school, chores, weights, and friends to deal with, I think that I am doing alright. Some teachers just are never satisfied though. I am excelling well in all of those categories. Next year I will do a lot better in school though. I need to come out of high school with about a 3.4 GPA. I don't necessarily have a dream car. There are many cars that interest me, but none that out-weight the rest. I am sufficient at time management skills. I definitely could improve in that area, but for all the things that I have to do in one day, I think that I do a plenty good job. As I said 2 paragraphs ago, I will be spending more time on school next year, which means that something will have to give a little. I believe that something will be basketball. I don't think there should be but one rule in the dress code. I think that the only rule should be that you can't come to school naked. Telling kids what they can and cannot wear because it is ?revealing' is stupid. The reason that the code is even put there, is because of all the horny guys in this school of ours. So the stupid principal forces a dress code on the student population, which is mainly put in for the girls. If men are so big on respecting girls, then why do they dictate what the girl can and cannot wear. I would like to see change in this rule soon. I think that having a pager or cell phone is perfectly fine. As long as the pager or phone isn't on in class, it should be fine to have on campus. There is no danger. The paranoid geezers of this school are worried about drug deals if you have either of these. Well that is none of their business of who does drugs and who doesn't. Leave it to the cops to take care of things like that. I think that it is just a big power struggle, and the adults don't want to compromise because they think that we are ?lower' than them. I think that this is a form of prejudice and it should be stopped. I don't think there should be a ?legal' age for when you can get a job. If the person has the skills required, then they should be able to get the job. Telling a person when they can begin earning money in my opinion is wrong. I think it violates some kind of law. Considering all of the geezer adults in the country are all anal about law and stuff, they should pay attention to this one more carefully. Schools should definitely have more classes that students are interested in. Teens wont pay attention in class if it isn't interesting to hear. I think that if they just made the curriculum more interesting, then there would be better grades. If they had a whole new class that students wanted to take, then that would be even better, because there would be student activity in the class. Again it relates

Free Essays on Black Panthers

"We will not fightand kill other people of color in the world who, like black people, are being victimized by the white racist goverment of america." Huey P. Newton If you haven't already guessed it my essay is on a Civil Right's leader who's legacy has alternately been neglected, distorted, and discounted. For example in my research I found in one wide ranging account of the "African American freedom strugle" by historian Robert Weisbrot, that only one page out of 317 was devoted to the activities of the Black Panther Party. Another account would be in this class, where there was only a passing refrence to the presence of the party, that was established in our college. The most important person to have made a significant change in the rights of Blacks was Huey P. Newton. He had great courage and passion to defeat injustices and racism that existed in the United States towards blacks and other minority groups, and it was his influence to all the Blacks to defy white supremacy and his belief in arming themselves for self-defense that helped lead to the success of the Civil Rights movement. Huey P. Newton was born on Febuary 17, 1941 in Louisiana, the youngest of seven children. When Huey Newton was three, his family moved to Oakland. Where Walter Newton, a handyman and longshoreman, found work. The Newton's were part of the surge of 50,000 black migrants who headed to the West Coast to work in the shipyards and other war industries in the area. During World War II. After the war, however, many blacks and women were forced to give up their jobs to returning white soldiers. The black population of the area rose again as black GIs came back from the war fronts and brought their families. Black unemployment soared, as did antiblack sentiment. Although segregation was supposedly illegal, black residents of Oakland found themselves restricted to the neighborhoods around the East Bay. And... Free Essays on Black Panthers Free Essays on Black Panthers "We will not fightand kill other people of color in the world who, like black people, are being victimized by the white racist goverment of america." Huey P. Newton If you haven't already guessed it my essay is on a Civil Right's leader who's legacy has alternately been neglected, distorted, and discounted. For example in my research I found in one wide ranging account of the "African American freedom strugle" by historian Robert Weisbrot, that only one page out of 317 was devoted to the activities of the Black Panther Party. Another account would be in this class, where there was only a passing refrence to the presence of the party, that was established in our college. The most important person to have made a significant change in the rights of Blacks was Huey P. Newton. He had great courage and passion to defeat injustices and racism that existed in the United States towards blacks and other minority groups, and it was his influence to all the Blacks to defy white supremacy and his belief in arming themselves for self-defense that helped lead to the success of the Civil Rights movement. Huey P. Newton was born on Febuary 17, 1941 in Louisiana, the youngest of seven children. When Huey Newton was three, his family moved to Oakland. Where Walter Newton, a handyman and longshoreman, found work. The Newton's were part of the surge of 50,000 black migrants who headed to the West Coast to work in the shipyards and other war industries in the area. During World War II. After the war, however, many blacks and women were forced to give up their jobs to returning white soldiers. The black population of the area rose again as black GIs came back from the war fronts and brought their families. Black unemployment soared, as did antiblack sentiment. Although segregation was supposedly illegal, black residents of Oakland found themselves restricted to the neighborhoods around the East Bay. And...

Short Love Quotes from Movies

Short Love Quotes from Movies Look into your lovers eyes. Whisper one of these famous movie love quotes. Cupid has to strike! These famous movie love quotes are a favorite with many couples. If you are looking for the most seductive love quote, you will find it here. Love quotes of this intensity are hard to find. Casablanca Kiss me. Kiss me as if it were the last time. City of Angels I would rather have had one breath of her hair, one kiss from her mouth, one touch of her hand, than eternity without it. One. Crimes and Misdemeanors My husband and I fell in love at first sight... maybe I should have taken a second look. Fried Green Tomatoes A heart can be broken, but it keeps beating just the same. Four Weddings and a Funeral I always just hoped that, that Id meet some nice friendly girl, like the look of her, hope the look of me didnt make her physically sick, then pop the question and... um... settle down and be happy. It worked for my parents. Well, apart from the divorce and all that! Love and Death To love is to suffer. To avoid suffering, one must not love; but then one suffers from not loving. Therefore, to love is to suffer, not to love is to suffer, to suffer is to suffer. To be happy is to love; to be happy then is to suffer, but suffering makes one unhappy; therefore to be unhappy one must love or love to suffer or suffer from too much happiness. I hope youre getting this down. When Harry Met Sally I love that you get cold when it is 71 degrees out. I love that it takes you an hour and a half to order a sandwich. I love that you get a little crinkle in your nose when youre looking at me like Im nuts. I love that after I spend day with you, I can still smell your perfume on my clothes. And I love that you are the last person I want to talk to before I go to sleep at night. And its not because Im lonely, and its not because its New Years Eve. I came here tonight because when you realize you want to spend the rest of your life with somebody, you want the rest of your life to start as soon as possible. You cant express every feeling that you have every moment that you have them. Wizard of Oz Hearts will never be practical until they are made unbreakable... Without a heart, I can never really know what it would be like to love someone, or ever really understand trashy novels.

Rien - Idiomatic French Expressions

Rien - Idiomatic French Expressions The French pronoun rien usually means nothing, and is also used in many expressions. Learn how to say for no reason, not a chance, worthless, and more with this list of expressions with rien. Possible Meanings of Rien nothinganythinglove (tennis)nil, zero (sports) le rien - nothingnessun rien - a mere nothingdes riens - trivia Expressions with Rien (faire qqchose) comme un rien(to do something) with no trouble, like nothing at allun coup pour riena free gode rienyoure welcomedeux fois riennext to nothingjamais rien / As-tu jamais rien vu de plus bizarre  ?anything / Have you ever seen anything stranger?ne ___ en rien / Il ne ressemble en rien son pà ¨re.not at all, nothing like / He looks nothing like his father.ne... riennothing___ ne risque rien___ will be okay, nothing can happen to ___pour rienfor nothing, for a songpour un rienfor no reason, at the drop of a hatrien dà ©clarer ( la douane)nothing to declare (at customs)rien signalernothing to reportrien voirnothing to do withrien au mondenothing in the worldrien dautrenothing elseun rien dea splash, touch, hint of somethingrien de gravenothing seriousrien de moinsnothing lessrien de neufnothing newrien de plusnothing else, nothing morerien de plus facile(theres) nothing easier, nothing could be simplerrien de plus, rien de moinsnothing more or lessrien de rien (inf ormal)absolutely nothingrien de tel quenothing likerien du toutnothing at allrien partout (sports)nil all, love allrien queonlyrien que à §a (ironic)thats all, no lessrien qui vaillenothing useful, nothing worthwhile___ sinon rien___ or nothingtrois fois riennext to nothingcomprendre rien riento not have a cluenavoir rien voir avec/dansto have nothing to do withnavoir rien contre (quelquun)to have nothing against (someone)navoir rien de (quelquun)to having nothing in common with (someone)nà ªtre riento be a nobody/nothing, to be worthlessÇa ne compte pour rien dansThat has nothing to do withÇa ne fait rien.It doesnt matter, Never mind. Ça ne me dit rienI dont feel like itÇa ne risque pas !Not a chance!Ça ne vaut rienIts worthless, its no goodÇa ne veut dire rienThat doesnt mean a thingCela na rien voir avec...That has nothing to do with...Cela na rien dimpossible.That is perfectly possible.Cela ne rime rienThat makes no senseCe que tu fais ou rien !Dont bother!Cest à §a ou rienTake it or leave itCest mieux que rienIts better than nothingCest rien de le dire. (informal)Thats an understatement.Cest tout ou rien.Its all or nothing.Cest un(e) rien du toutHe (She) is a nobody, no goodCe nest pas rien.Its not nothing, Its no picnic.Ce nest rien.Its nothing, Never mind.Cà ©tait un coup pour rien.It was all for nothing.Il nen est rien.Its nothing like that, Thats not it at all.Il ny a rien faireTheres nothing we can do, Its hopelessJe nai rien dire surI have nothing to say about, I cant complain aboutJe ny peux rienTheres nothing I can do about it.Je ny suis pour rienIve got nothing to do with it. On na rien pour rienEverything has a price.Qui ne risque rien na rien (proverb)Nothing ventured, nothing gainedRien faire !Its no good!Rien ne dit que ...Theres nothing to say that ...Rien ne va plusNo more betsRien ny faitNothing is any goodTu nas rien dire !Youre in no position to comment! You cant complain!La và ©rità ©, rien que la và ©rità ©.The truth and nothing but the truth.Y a-t-il rien de plus ___ ?Is there anything more ____?

Musical Analysis Essay Example | Topics and Well Written Essays - 2500 words

Musical Analysis - Essay Example 21). The means and methods used to identify the working of music vary from one analyst to another depending upon what purpose the analysis serves. Musical analysis has a history that dates back to 1750s, though it has also existed from the Middle Ages as a scholarly tool. A.B. Marx has been known for the formalization of concepts regarding music understanding and composition from the later half of the 19th century. While musical analysis is a way to identify how music works, it has been a subject of criticism since musical analysis has been thought to mutilate the musical work’s spirit through decomposition. It is said that â€Å"too much analysis kills the spirit of a performance† (Poore, 2005). My understanding of musical analysis is of a technique in which the working or a piece of music is judged on the basis of some well-defined scales or criteria. It comes with the presumption that a piece of music has to have a definite function and that it must conform to the se t principles in order to be considered valid or credible. This is where I personally side with the critics of musical analysis because in this age of innovation and creativity, development of music beyond these criteria and scales can be expected or that these criteria are also updated or modified to suit the tastes of the next generation. The end result of musical analysis is identification of a piece of music with a particular theme, genre, or style. I believe that music is a form of art and it has to be free of all constraints and boundaries in order to constantly evolve and provide the audience with something new and entertaining all the time. â€Å"Some authors regard analysis as ‘implicit in what the performer does’, however ‘intuitive and unsystematic’ it might be, while for others, performers must engage in rigorous and theoretically informed analysis of a work’s ‘parametric elements’ if its ‘aesthetic depth’ is to be plumbed† (Rink, 2002). Some musicians actually think like analysts and draw upon the parametric elements of their music while performing it while there are others for which, musical performance is a thing entirely disconnected from its analysis. Analysis is more of an academic process in which a piece of music is described in literary terms. I think that what appeals to the audience is not the extent to which a piece of music can be described or identified with a particular genre, but it is the emotions that it is capable of arising in the audience, the magic, power, and strength that it carries to send give the audience goosebumps. The power of a piece of music can be better understood from a first-hand experience of its performance rather than analysis. Analysis does not essentially capture the essence of performance, and that is why it is inferior to the experience of performance from the perspective of audience. â€Å"Analysis is generally implicit, since many musician s do not command the verbal or notational tools that would enable explicit results†¦.[Nevertheless] by applying a procedural knowledge to a stock of declarative knowledge of prototypical pieces and situations, a musician gains additional declarative knowledge, increasing his or her knowledge of repertoire† (Brinner, 1995, p. 148). I agree because while composing music, many musicians have factors beyond the notational or verbal tools in their mind like what would appease the audience and experimenting with new tones and melodies to entertain the audience. As a result of this, their music might gain a lot of appreciation from the audience but fail to comply with the standards established by the analysts. However, a musician who has a fair understanding of the analysts’ criteria is able to incorporate those elements in the music to enhance it, though

Political science Essay Example | Topics and Well Written Essays - 750 words - 12

Political science - Essay Example Foreign policy refers to considerations of government made so as to achieve simultaneously national and international objectives (Trubowitz 90). The world as it is today has become extremely globalized and interdependent. Decisions at one end of the world elicit consequences and reactions in another part of the world. Consequently, nations of the world are compelled to subject their national choice of policies to a test of its effects to the rest of the world through the foreign policy. The policies govern their relations and mode of operation with other nationalities. Foreign policy ensures determines the political relations between two nations and subsequently, their economic impact. Bureaucracy in its simplest form is a rigid administrative policy-making group that is often not elected. A bureaucracy has a fixed way of doing things and does not accommodate change with ease (Ginsberg et al. 48). Bureaucrats are rampant in all government agencies and are, in fact, the way the government executes its roles. The inherent inflexibility attracts criticism as it causes management inefficiency and time wastage. As a matter of fact, modern theories of management have focused a lot of attention on the ways to eliminate bureaucracies. For large organizations, however, it is not possible to maintain order and coordinated workflow without bureaucracy One of the greatest challenges of foreign policy, today is striking a balance between national objectives and international goals (Trubowitz 68). More often than not, these two objectives are in conflict, and the differences are quite irreconcilable. A decision to favor the citizens of one country is a decision to predispose the fate of individuals of another country to doom. But the f have to pursue the objectives that best suit the citizens of their country. A recent case in hand is the stalemate created between the governments of UK, Australia, and Kenya. The two European nations

Obstructive Jaundice Essay Example | Topics and Well Written Essays - 3250 words

Obstructive Jaundice - Essay Example Here most of the bilirubin combines with glucuronide to form conjugated or direct bilirubin, then is absorbed in bile, and excreted in the feces. If a disorder prevents this process from completing itself, the yellow-colored bilirubin builds up in the system until it becomes remarkable in the mucous membranes and skin (What is Jaundice 2006). The discoloration usually is detected clinically once the serum bilirubin level rises above 3 mg per dL (51.3 mol per L) (Roche and Kabos, 2004). Jaundice in an adult patient can be due to a wide array of benign or deadly disorders. Organizing the differential diagnosis by prehepatic, intrahepatic, and posthepatic causes may help make the work-up more manageable. Prehepatic causes of jaundice include hemolysis and hematoma resorption, which lead to elevated levels of unconjugated (indirect) bilirubin. Intrahepatic disorders can result to unconjugated or conjugated hyperbilirubinemia. The conjugated (direct) bilirubin level is often elevated by alcohol, infectious hepatitis, drug reactions, and autoimmune disorders. Posthepatic disorders also can cause conjugated hyperbilirubinemia (qtd. from Roche and Kobos, 2004). ... Hepatic jaundice causes range from acute viral hepatitis to liver disease caused alcoholism. Neonatal jaundice, common in newborns, is usually brief lasting only a week or so and is thought to be a result of the still-developing physiology. Though it is usually harmless and in most cases passes on its own, any infant displaying signs of jaundice should be seen by a pediatrician. (In newborns the liver sometimes requires a week or so to adjust and jaundice may be present during this time. Though this is not due to disease, it is still considered hepatic because liver function is at the root of the condition (What is Jaundice 2006). Post-hepatic (obstructive) jaundice, occurs when bile cannot discharge properly to the feces. Gallstones obstructing the bile duct, other ductal obstructions and certain cancers can cause post-hepatic jaundice marked by pale stools lacking the normal pigment contained in bile (What is Jaundice 2006). Obstructive jaundice Obstructive jaundice caused by obstruction of the bile ducts, as with gallstones. The liver normally produces about 1 litre of bile each day, which is secreted (passed) into the bile duct system and stored in the gallbladder. The bile duct empties into the upper intestine (duodenum) to help in digestion. Obstruction anywhere in this drainage system causes the blood levels of bilirubin to increase, resulting in "obstructive jaundice (What is obstructive Jaundice 2005)." Causes of obstructive jaundice Jaundice is not critical by itself however could indicate a more serious underlying conditions that should be diagnosed and treated as early as possible (What is Jaundice 2006). A thoroughly investigated is needed so that the underlying cause can be

Create an argument that explains your point of view Essay

Create an argument that explains your point of view - Essay Example Rolling Stone tries to evaluate his past life and finding reasons why he engaged in the bombing. What factors in his life motivated his actions. It however, is debatable on the question as to whether they are awarding him a celebrity status considering how they went about it. Putting him on the cover of Rolling Stone magazine which is on â€Å"normal† cases braced by celebrities and rap stars, is in a way giving him a celebrity status. The average American citizen or even anywhere else in the world takes what he or she is fed by the media seriously. In a large sense the sets the agenda for the public. They determine, to a big extent, which models will be talked about by the public, which music the public will be excited about and in this case, arguably, who will be the next celebrity. By putting him on the cover, they did just that. It is however risky to give him a celebrity status considering he will develop a following which will turn out to be counterproductive. This shoul d not be mistaken as an outright rejection for the story, it is important that people also understand the â€Å"other† life of suspects like Tsarnaev. However, this should be done very carefully so it doesn’t seem as though the acts they are suspected of are being glorified. Images, for instance the one used on the cover of Rolling Stone seems glorifying. ... The question that people will probably be asking is how this magazine influences on other would be bombers. The article might actually encourage more of attention desperate individuals to engage in such acts. Al-Qaida, a self-confessed terror group indicated in their twitter handle that they were happy of all the media attention they were receiving due to the west gate attack in Kenya. This means that the terrorists value attention, and they do most of what they do to get attention. Now giving them this attention by reporting the acts of bombing, most people think should be enough. Going ahead and featuring them on a celebrity magazine, on the cover of it, is not the best way to deny them the attention. Tsarnaev is now becoming an iconic figure for his followers. Assuming they were more who engaged in one way or another in the bombing, the featuring of Tsarnaev makes them feel as though they can as well do with the attention. The magazine is turning him into some sort of a hero for h e has done. Celebrities are known to be individuals highlighted by the media mostly because of the interest they arouse among the public. Tsarnaev, should not arouse interest and the media should not attempt to paint him as arousing interest. As human beings we all have an evil part. It is said, that all human beings have a potential of being an angel or a beast, how we turn out all depends on which is natured by the society. For balance and stability, our evil parts should be shunned and our good parts honed. The media has a huge responsibility in shaping these. In the social media, due to the anonymity provided by such platforms, people often praise bad and glorify evil. This could be to get attention or to feel up for social gaps at home or in

Text Set-Literacy Curriculum Research Paper Example | Topics and Well Written Essays - 500 words

Text Set-Literacy Curriculum - Research Paper Example This leaves no room for ambiguity for students at the same time in understanding the subject matter. It is rather suggested that teachers should undertake activities in class where students will have to select short text as per their choice. However, a limitation is there in this regard i.e. teacher’s obligation for reading each and every story that the students pick as a short text. For this, it can be said that short text is much manageable in reading (Fletcher & Portalupi, 2001). It immediately finishes up in one sitting rather than longer novels that are continued for some days. Looking at the real life examples of reading habits of general public, short text such as tweets, how-to articles, cookbooks, announcements, online forums are read more than longer books. Therefore, there is an avid need of making reading interesting for peers that is possible with the help of short text selection (Cohen,

Inventions that change the world Essay Example for Free

Inventions that change the world Essay American statesman and inventor Benjamin Franklin was particularly interested in electricity and set up a small laboratory in his house to investigate its properties. His interest soon switched from electricity to lightning after he noticed the similarities between the two. One stormy night, he conducted a life-threatening experiment to demonstrate that lightning is the result of an electric build up. He constructed a kite that carried a metal spike and flew it into the thunderstorm. The kite had a key attached near the bottom of the ribbon and Franklin noticed that it sparked as he brought his knuckles close to it. Franklin had shown that lightning was form of electricity and he went on to use this knowledge to design a lightning rod to protect buildings. LINNAEAN TAXONOMY Linnaean taxonomy is a system of classification of living organism that is used throughout biological sciences. The most important feature of Linnaean Taxonomy is a system known as binomial nomenclature. The first name identifies the genus to which the organism belongs; the second name is its unique species. BIMETTALIC STRIP A bimetallic strip is a simple device which converts thermal energy into mechanical motion. It is used as a thermally activated switch or heat indicator and works on the principle of differential expansion of heated dissimilar metals. The bimetallic strip is made up of two different metals which are bonded together to form a straight, flat strip or a concentric coil. When the strip is heated, one of the metals heats up and expands faster than the other, causing the strip to bend. This mechanical deflection  is then harnessed in various ways to switch electrical circuits or move a dial to a give heat value indication. MARINE CHRONOMETER A marine chronometer is a clock that is precise and accurate enough to be used as a portable time standard; it can therefore be used to determine longitude by means of celestial navigation. When first developed in the 18th century, it was a major technical achievement, as accurate knowledge of the time over a long sea voyage is necessary for navigation, lacking electronic or communications aids. The first true chronometer was the life work of one man, John Harrison, spanning 31 years of persistent experimentation and testing that revolutionized naval (and later aerial) navigation. SPINNING JENNY The increased speed of weaving created a new problem because it now took three spinners to keep up with one weaver. This problem was resolved in 1764, when James Hargreaves invented a new machine that was capable of spinning eight threads of cotton yarn, instead of the spinning wheels one. The new machine was called the spinning jenny. All this time the processes of spinning and weaving were still being carried out at home. This was possible because both the flying shuttle and the spinning jenny were small enough to be used in the cottage. SURVEYOR’S PERAMBULATOR WHEEL The origins of the surveyors wheel are connected to the origins of the odometer. While the latter is derived to measure distances travelled by a vehicle, the former is specialized to measure distances. Much of the material on the earliest stages in the development of the hodometer is adequately covered in odometer. In the 17th century, the surveyors wheel was re-introduced and used to measure distances. A single wheel is attached to a handle and the device can be pushed or pulled along by a person walking. Early devices were made of wood and may have an iron rim to provide strength. The wheels themselves would be made in the same manner as wagon wheels and often by the same makers. The measuring devices would be made by makers of scientific instruments and the device and handles would be attached to the wheel by them. The device to read the distance travelled would be mounted either near the hub of the wheel or at the top of the  handle. STEAM ENGINE WITH SEPARATE CONDENSER A steam engine is a heat engine that performs mechanical work using steam as its working fluid. Steam engines are external combustion engines where the working fluid is separate from the combustion products. Non-combustion heat sources such as solar power, nuclear power or geothermal energy may be used. The ideal thermodynamic cycle used to analyze this process is called the Rankine cycle. In the cycle, water is heated and transforms into steam within a boiler operating at a high pressure. When expanded through pistons or turbines, mechanical work is done. The reduced-pressure steam is then condensed and pumped back into the boiler. WATER FRAME In 1769, a wig maker and pricier, Richard Arkwright, had observed that, even with these improvements, the hand loom weavers could not keep up with the demand for cloth. He therefore set out to design and produces a much larger spinning machine that would be able to cope with the increased demand. His design became known as the water frame. It was given this name because it needed energy from a watermill to power it. It was therefore too large for cottage work and, consequently, had to be placed in a large building known as a factory. This meant that, for the first time, a family involved in the production of woven cloth were now split up. The women of the family, whom, you will remember, were the traditional spinners, now, had to leave their cottages and work in a large building where the water frames had been installed. Since these factories used water as their power source, they tended to be built in areas where a good supply of fast flowing water was available. These early water powered factories, because they looked like large watermills, became known as mills. They were mainly concentrated in the mountainous areas of Britain where water was plentiful. For the first time men and women were separated in their work. The man stayed at home to produce the weaving and the women left home each day to work in the factory, producing the yarn for their men folk to weave into cloth. VENETIAN BLIND Venetian blind is a type of window covering. There are many different kinds of window blinds which use a variety of control systems. A typical window blind is made up of several long horizontal or vertical slats of various  types of fabric, wood, plastic or metal which are held together by cords that run through the blind slats. Window blinds can be adjusted by rotating them from an open position to a closed position with either a manual or remote control which allows the slats to overlap and block out most of the light. There are also several types of window blinds that use a single piece of material instead of slats. A window blind is also known as a window shade. CATERPILLAR TRACKS Continuous track, also called tank tread or caterpillar track, is a system of vehicle propulsion in which a continuous band of treads is driven by two or more wheels. This band is typically made of modular steel plates in the case of military vehicles, or rubber reinforced with steel wires in the case of lighter agricultural or construction vehicles. The large surface area of the tracks distributes the weight of the vehicle better than steel or rubber tyres on an equivalent vehicle, enabling a continuous tracked vehicle to traverse soft ground with less likelihood of becoming stuck due to sinking. The prominent treads of the metal plates are both hard-wearing and damage resistant, especially in comparison to rubber tyres. The aggressive treads of the tracks provide good traction in soft surfaces but can damage paved surfaces. Special tracks that incorporate rubber pads can be installed for use on paved surfaces to prevent the damage that can be caused by all-metal tracks. Continuous tracks can be traced back as far as 1770 and today are commonly used on a variety of vehicle including bulldozers, excavators, tanks, and tractors, but can be found on any vehicle used in an application that can benefit from the added traction, low ground pressure and durability inherent in continuous track propulsion systems. SODA WATER Carbonated water (soda water) is water into which carbon dioxide gas under pressure has been dissolved. This process, known as carbonation, is a process that causes the water to become effervescent. For people who enjoy drinking soft drinks, carbonated water can provide a calorie- and sugar-free substitute. The vast majority of carbonated water is sold in ready to drink bottles like mineral water or carbonated beverages such as soft drinks, but it is easy to prepare at home with soda makers. S-TRAP FOR TOILET In plumbing, a trap is a U-, S-, or J-shaped pipe located below or within a plumbing fixture. An S-shaped trap is also known as the S-bend invented by Alexander Cummings in 1775 but became known as the U-bend following the introduction of the U-shaped trap by Thomas Crapper in 1880. The new U-bend could not jam, so, unlike the S-bend, it did not need an overflow. The bend is used to prevent sewer gases from entering buildings. In refinery applications, it also prevents hydrocarbons and other dangerous gases from escaping outside through drains. The most common of these traps in houses is referred to as a P-trap. It is the addition of a 90 degree fitting on the outlet side of a U-bend, thereby creating a P-like shape. It is also referred to as a sink trap because it is installed under most house sinks. Because of its shape, the trap retains a small amount of water after the fixtures use. This water in the trap creates a seal that prevents sewer gas from passing from the drain pipes back into the occupied space of the building. Essentially all plumbing fixtures including sinks, bathtubs, and toilets must be equipped with either an internal or external trap. Because it is a localized low-point in the plumbing, sink traps also tend to capture heavy objects (such as jewellery) that are inadvertently dropped into the sink. Traps also tend to collect hair, sand, and other debris and limit the ultimate size of objects that will pass on into the rest of the plumbing, thereby catching over-sized objects. For all of these reasons, most traps can either be disassembled for cleaning or they provide some sort of cleanout feature. SUBMERSIBLE CRAFT Submersible is a small vehicle designed to operate underwater. The term submersible is often used to differentiate from other underwater vehicles known as submarines, in that a submarine is a fully autonomous craft, capable of renewing its own power and breathing air, whereas a submersible is usually supported by a surface vessel, platform, shore team or sometimes a larger submarine. In common usage by the general public, however, the word submarine may be used to describe a craft that is by the technical definition actually a submersible. There are many types of submersibles, including both manned and unmanned craft, otherwise known as remotely operated vehicles or ROVs. Submersibles have many uses worldwide, such as oceanography, underwater archaeology, ocean exploration, adventure, equipment maintenance/recovery or underwater videographer. BORING MACHINE A tunnel boring machine (TBM) also known as a mole, is a machine used to excavate tunnels with a circular cross section through a variety of soil and rock strata. They can bore through anything from hard rock to sand. Tunnel diameters can range from a metre (done with micro-TBMs) to 19.25 m to date. Tunnels of less than a metre or so in diameter are typically done using trenchless construction methods or horizontal directional drilling rather than TBMs. Tunnel boring machines are used as an alternative to drilling and blasting (DB) methods in rock and conventional hand mining in soil. TBMs have the advantages of limiting the disturbance to the surrounding ground and producing a smooth tunnel wall. This significantly reduces the cost of lining the tunnel, and makes them suitable to use in heavily urbanized areas. The major disadvantage is the upfront cost. TBMs are expensive to construct, and can be difficult to transport. However, as modern tunnels become longer, the cost of tunnel b oring machines versus drill and blast is actually less—this is because tunnelling with TBMs is much more efficient and results in a shorter project. STEAMBOAT A steamboat is a boat in which the primary method of propulsion is steam power, typically driving propellers or paddlewheels. Steamboats sometimes use the prefix designation SS, S.S. or S/S (for Screw Steamer) or PS (for Paddle Steamer), however these designations are most often used for Steamships. The term steamboat is used to refer to smaller, insular, steam-powered boats working on lakes and rivers, particularly riverboats. As using steam became more reliable, steam power became applied to larger, ocean-going vessels.

About network topology

About network topology Task: 1 Network Topology: Network topology is the study of the arrangement or mapping of the elements (links, nodes, etc.) of a network, especially the physical (real) and logical (virtual) interconnections between nodes. A local area network (LAN) is one example of a network that exhibits both a physical topology and a logical topology. Any given node in the LAN will have one or more links to one or more other nodes in the network and the mapping of these links and nodes onto a graph results in a geometrical shape that determines the physical topology of the network. Types of Network Topology: The arrangement or mapping of the elements of a network gives rise to certain basic topologies which may then be combined to form more complex topologies (hybrid topologies). The most common of these basic types of topologies are: Star Topology. Bus Topology. Ring Topology. Mesh Topology. Star Topology: Advantages and Disadvantages of Star Topology: Advantages: Batter performance. Isolation of devices Benefits from centralization Disadvantages of Star Topology: The high dependence of the system on the functioning of the central switch The performance and scalability of the network depend of the switch. Bus Topology: Advantages and Disadvantages of Bus Network: Advantages: Easy to implement and extend Requires less cable length than a star topology Cheaper than other topologies. Disadvantages: Limited cable length and number of stations. If there is a problem with the cable, the entire network goes down. Maintenance costs may be higher in the long run. Ring Topology: Advantages Very orderly network where every device has access to the token and the opportunity to transmit Performs better than a star topology under heavy network load Can create much larger network using Token Ring Disadvantages One malfunctioning workstation or bad port in the MAU can create problems for the entire network Moves, adds and changes of devices can affect the network Network adapter cards and MAUs are much more expensive than Ethernet cards and switches Much slower than an Ethernet network under normal load Mesh Topology: A full mesh topology occurs when every node on the network has a separate wire connecting it to very other node on the network. It provides each device with a point-to- point connection to every other device in the network. A full mesh topology is redundant because if any one node of connection fails, all remaining nodes can continue communicating. Topology Choice: I choice star and mesh topology because these two topologies are best topology from other topology. In here establish a network for a police station, this police station has accident emergency department, maternity department, childrens unite, x-ray department and eye department. At first I choice the star topology but its have some disadvantage the primary disadvantage of a star topology is the high dependence of the system on the functioning of the central switch. While the failure of an individual link only results in the isolation of a single node, the failure of the central switch renders the network inoperable, immediately isolating all departments. The performance and scalability of the network also depend on the capabilities of the switch. Network size is limited by the number of connections that can be made to the switch, and performance for the entire network is capped by its throughput. While in theory traffic between the switch and a node is isolated from other nodes on the network, other nodes may see a performance drop if traffic to another node occupies a significant portion of the central nodes processing capability or throughput. Furthermore, wiring up of the system can be very complex. And it has some Advantages too that are: Better performance: Passing of Data Packet through unnecessary nodes is prevented by this topology. At most 3 devices and 2 links are involved in any communication between any two devices which are part of this topology. This topology induces a huge overhead on the central switch, however if the central switch has adequate capacity, then very high network utilization by one device in the network does not affect the other devices in the network. Benefits from centralization: As the central switch is the bottleneck, increasing capacity of the central switch or adding additional devices to the star, can help scale the network very easily. The central nature also allows the inspection traffic through the network. This can help analyze all the traffic in the network and determine suspicious behavior. For this reason I also choice star topology. It will be main topology and need a topology it will be help for backup. Then choosing mesh topology that is maximum problem free. If star topology will disturb then mesh topology will help this time. Mesh topology cover dramatically more department and reach more users than other topology by relying on sophisticated mesh switching technology to increase range and topology capacity. Plug-and-play Setup and Configuration: Every mesh system works out of the box, without requiring sophisticated site-surveys or command-line setup. Hosted back-end system automatically configures every switch as part of this department topology, and the web-based centralized management shows how everything is working through a simple, intuitive interface that can be used from anywhere in the world. Scale to Thousands of Simultaneous Users: Field-tested by one department to other department, Mesh topology platform provides high quality of service to thousands of simultaneous users without missing a beat. Intelligent traffic queuing and packet prioritization, combined with the ability to add an unlimited number of additional network gateways, means your networks capacity can continue to grow with demand. Interference-aware Mesh Switching: Instead of relying on a single large antenna to cover every user, each radio in a mesh topology cooperates to find the best path to carry a users traffic to the Intranet. As they operate, every network re-evaluates thousands of switching paths every minute, resulting in amazing reliability and network capacity. Mesh intelligent mesh switching means every repeater you add extends the reach of the network and makes the mesh more reliable by adding additional links. Thats why I choice star and mash topology. These two topologies are join work together for police station departments. Each department of this police station is very important. Task: 2 The Internet is an excellent tool for collecting and transmitting data for a police station. It is possible to build a Web site for data entry without much programming experience using commercially available programs. Such a Web site allowed rapid, inexpensive and easy transfer of data between researchers and the coordinating center. It also permitted easy communications between the coordinating center and the investigators. Many technical and practical lessons were learned from this experience so that further systems may be more efficient and reliable. Once data are entered into the web pages and sent to an end-point (e.g., database, spreadsheet, or e-mail) they are checked and validated remotely by the owner of the end-point. Any feedback is sent to the user with time delay because there is no immediate interaction between the database and the user. This is the easiest way to set up a data entry Web site, but it lacks automatic and immediate interactivity. One-way data flow with client-sided validation Validation of the entered data can be performed on the client (browser) side. This is mostly done with JavaScript, a program language developed to run on browsers. The JavaScript code is sent with the HTML code (hypertext markup language, the computer language that defines the way web pages are displayed on a computer) of the web page to the user. It can react to false data entry or missing data with a message box informing the user. The advantage is that basic data check is performed before they are being sent. Yet, client-sided data validation has some major disadvantages (other than the need of programming knowledge). Because the JavaScript code is sent with the HTML code to the browser, the web pages are larger and this may lead to a longer download time, particularly for users with a slow Internet connection. In addition, anyone can see the programming code, a feature not always in the interest of the web site designer. Enterprise Networking Assignment September 2008 International Advanced Diploma in Computer Studies Enterprise Networking  ©NCC Education Ltd 2008 Two-way data flow with server-sided validation After the data are entered and sent to the server they are validated and checked by a program residing on that server. Depending on the validation result, a new web page is generated by the web server and sent to the user with, for example, a request to reenter incorrect data or to confirm that all data have been correctly entered. With this technique, there is no extra load on the web pages and the programming code is not visible to the user. The main disadvantage (other than the need for extensive programming knowledge) is that the data first have to be sent to the server and a response has to be sent back to the user, the so-called client-server-client round trip. This may lead to a higher traffic workload, which can be annoying, especially to the user with a slow Internet connection. Two-way data flow with server and client-sided validation The combination of the server and client-side interaction seems to be the ideal solution from the point of user friendliness. Simple data validation is performed using client-side scripting, and more complex tasks are performed on the server side. Yet its implementation is time consuming and complex. Referring case history, status, diagnosis code, textual request are entered by the general practitioner. So instead of entering the detailed referring data, the administrator can choose the current case from the waiting list. On the other hand the family doctor can access his/her patients care data from the police station information system automatically as the actual police station care had been closed with the final documents. In this way the family doctor can see the treatments result before patient would show up in the doctors office with the paper-formed final report. By merging the final reports data of police station cases into the police station application system these data can be accessed for any future patient-visit. Question: Access issues for patients with disabilities, e.g. blind/partially-sighted. The police station authority creating a password protected web page on the police station website on which all information pertinent would be posted. A hard copy of the posted information would be available for reference at the police station. Discussion included the possibility of automatic notification to patient when information has been posted and the use of laptop computers at police station for each disable patient to access the posted information during the police station. Patients of the police station expressed their support of this proposal and asked that police station staff to establish a web-based system. There are two methods of roaming in a node-to-node configuration: Patchwork roaming and Mobile Mesh roaming. Nodes in a mobile mesh by their very nature roam in and out of coverage and between networks. With Patchwork roaming, wireless connection between clients hardware and mesh network, a wireless data networks, public Wi-Fi hotspots, and enterprise WLANs, are difficult to operate at best. The clients using Ipv4 that do not automatically change the IP address when moving between mesh nodes and wireless nodes. Manual intervention may be required. With Patchwork seamless roaming can be achieve; however, it requires DHCP to set every few seconds. The solution will be wait until Ipv6. Mobile meshes implements self-contained dynamic addressing and rendezvous technologies to simplify address management and enable true nomadic operation without reliance on external clients hardware. Mobile devices can join and leave a mobile mesh and/or connect to public or private fixed infrastructure, all while retaining connectivity to critical services. Wireless Mesh topology every node has a connection to every other node in the network realm. There is two types of mesh topologies: full mesh and partial mesh. Full wireless mesh topology occurs when every node in a realm is connected to every other node in a network. Full mesh is yields the greatest amount of redundancy, so in the event that one of those nodes fails, network traffic can be directed to any of the other nodes. Full wireless mesh is difficult to achieve on a large scale using MeshAP; however, small-scale area like offices or small campus may be ideal. One should note that it is difficult to deploy a full mesh topology. Partial mesh topology yields less redundancy than full mesh topology. With partial mesh, some nodes are organized in a full mesh scheme but others are only connected to one or more nodes in the network realm. Partial mesh topology is commonly found in either small or large networks or fulfilling the last mile connection to a full meshed backbone. There are 4 main types of partial wireless mesh nodes topologies: Point-to-point Point-to-multipoint or Multipoint-to-point, and Multipoint-to-multipoint, Metropolitan Point-to-point and point-to-multipoint networks have long been the standard for fixed wireless deployments and some 802.11 based networks. In testing of mesh networks have proven to be most versatile, overcoming a number of disadvantages in traditional wireless topologies. This section will detail the fundamentals of MeshAP and its inherent advantages. Point-to-Point nodes topology A point-to-point network is the simplest form of wireless network, composed of two radio and two high gain antennas in direct communication with each other. Point to point links are often used to provide high-performance, dedicated connections or high-speed interconnect links. These links are quick to deploy individually, but do not easily scale to create a large network. Client used these nodes in a site-to-site configuration. Point to Multipoint nodes topology A point-to multipoint or a Multipoint to point nodes share link between an uplink node with omni directional antenna and repeater nodes or downlink nodes with high gain directional antennas. This type of network is easier to deploy than Point to point network because adding a new subscriber only requires equipment deployment at the subscriber site, not at the uplink node; however, each remote site must be within range and clear line of sight of the base station. Trees, hills and other line of sight obstruction make point to multipoint nods impractical for residential and home office coverage. A Point to Multipoint network is suited for either backhaul operations or customers that need reliable, high-speed connections, but are not willing to pay for dedicated capacity that may go unused. The nodes performed as a bridge to the uplink network and are generally in wired configuration for the clients. The problem with point to Multipoint node topology is that they are not design to mesh w ith other nodes due to the directional antenna. Multipoint nodes topology Multipoint to multipoint networks creates a routed mesh topology that mirrors the structure of a wired Internet. To build a mesh network, indoor or outdoor Internet access is first established with the deployment of an access switch connected to a wired ISP. Additional access routers are then deployed throughout the coverage area until a maximum density is achieved. Each access router not only provides access for attached users, but also become part of the network infrastructure by routing traffic through the network over multiple hops. This allows any client to join the network at any point of the mesh, even if the clients are not using a node. Client can access the entire mesh wireless or wired making this the best choice to deploy for areas that require larger coverage MeshAP. Metropolitan nodes topology Task 3 A method of half-duplex wireless communication comprising the steps of: transmitting from a base station to a plurality of mobile stations contained within one wireless communication cell that is serviced by the base station a Ready announcement indicating that the base station is ready to receive data on an uplink channel from the mobile stations, setting a random initial backoff time for each mobile station and transmitting from each mobile station a Request to Send announcement to the base station following expiration of the backoff time, transmitting from the base station to the mobile stations a Clear to Send announcement indicating that the first mobile station to have had its Request to Send announcement received in the base station can now transmit data, resubmitting the Request to Send announcements from the other mobile stations after a predetermined backoff time period has expired corresponding to a time period in which the first mobile station can transmit its data to the base station, and prioritizing any messages from the mobile stations by setting a higher probability that the base station will be in a receiving state rather than a transmitting state. The method according to claim 1 including the steps of transmitting Clear to Send announcements from the mobile stations to the base station indicating that mobile stations are clear to receive data from the base station, and transmitting the data from the base station to a respective mobile station based on the first Clear to Send announcement received within the base station. A half-duplex wireless communication system comprising a premises having a base station that services a defined communication cell, wherein the base station transmits and receives Request to Send and Clear to Send announcements to and from mobile stations to indicate that the base station can receive and send data, and a plurality of mobile stations that send and receive data after transmitting and receiving Clear to Send and Request to Send announcements to and from the base station based on the respective time period in which the base station has received the Clear to Send and Request to Send announcements from respective mobile stations, and means for prioritizing any messages from the mobile stations by setting a higher probability that a base station will be in a receiving state rather than a transmitting state. The system according to claim 3 wherein a Request to Send and Clear to Send announcement exchange must occur between the base station and mobile station before any data exchange can occur. The system according to claim 3 wherein the base station and a mobile station send and receive an acknowledgement message signalling the completion of data transfer. The main equipment that would be installed. Requirements Analysis Prior to any decision on strategy, the customers requirements for voice services must be clearly defined. Requirement operators will evaluate the current environment and practices, and then recommend strategic infrastructure decisions aligned with the customers business needs. For an IP Telephony infrastructure, this would include items such as: Call services Phone features Call conferencing services Messaging Toll bypass Directory services. IP Telephony System Installation Sequence: Once the infrastructure is ready to support IP Telephony, the actual deployment begins. The main steps are summarized below: Install IP Telephony Call Manager Publisher server. Configuration of IP Telephony system parameters, calling gateways, dial plan and phone clients. Install IP Telephony Call Manager Subscriber servers as needed. Install IP Telephony Voicemail Solution. Connect the IP Telephony system with minimal access to PSTN and tie line services. The features available with each system. Performance and security of the existing network to ensure that it is capable of supporting an IP Telephony infrastructure, and identify any areas where enhancements are necessary. In order to successfully deploy IP Telephony services, a minimum number of system features must be available in a customers network. For instance: Networks where IP Telephony is to be deployed should be structured on a 3-tier model: Core, Distribution and Access, to ensure an even flow of traffic. A poorly structured design can create unnecessary bottlenecks, impacting performance. User Access nodes must be switch based technology, to provide the bandwidth to the desktop that can best support voice and video. User Access nodes should support multiple virtual LANs (VLANs) within a single switch. This way, voice and data can be configured separately and efficiently, while sharing the same physical infrastructure. The switch must provide 802.1q trucking on user connections, also to allow voice and data traffic to be configured separately. The switch must be able to provide differentiated Quality of Service (QoS) on a user connection. If the switch does not support 802.1q trucking and differentiated QoS on each user connection, the IP Telephony system may still be deployed but a separate connection would be required for the phone and data equipment connections. Task: 4 The cost of equipment and installation. Cost of equipment and installation: The total cost and savings of an IP Telephony infrastructure should be identified and compared to the current costs. Company will examine the infrastructure costs and provide advice on how to invest to maximize the efficiency of the network. Items included in this analysis will include: Hardware Software Network / leased lines Support services. Value recovered from Cisco telephony trade in program ****** The cost of operating the system. Optimized operating cost structure Staff requirement for delivering voice services In-house solution VoIP-X solution Similar savings on server equipment, administration and support staff Estimated Retail Pricing The Microsoft Windows Server 2003 R2 licensing model consists of a Server operating system license and incremental Client Access Licenses (CALs) and is designed to allow for complete scalability of your cost in relation to your usage. In addition, Microsoft offers several flexible, cost-effective options for licensing. Note that there are a few CAL types available to suit your individual needs. This page provides guidance on the Windows Server 2003 R2 pricing and points you to our various licensing programs so you can find the most cost-effective solution for your organization. Product Offering U.S. Price* Description Windows Server 2003 R2 Standard Edition $999 Available in 32-bit and 64-bit versions. Includes 5 CALs (User or Device, chosen after purchase) Windows Server 2003 R2 Standard Edition $1,199 Available in 32-bit and 64-bit versions. Includes 10 CALs (User or Device, chosen after purchase) Windows Server 2003 R2 Enterprise Edition $3,999 Available in 32-bit and 64-bit versions. Includes 25 CALs (User or Device, chosen after purchase) Windows Server 2003 R2 Datacenter Edition $2,999 Available in 32-bit and 64-bit versions. Windows Server 2003 Web Edition, 32-bit version $399 Open NL Web Server product, no CALs required. Windows Server 2003 Web Edition, is not available in all channels. Open NL estimated price is $399. Contact your local System Builder, OEM, or reseller for actual prices or for more information on how to purchase. Task: 5 Benefit: As technical barriers are eliminated and more organizations begin to adopt Internet protocol-based telephony (IPT), companies are finding that here are demonstrable, real-world total costs of ownership (TCO) advantages associated with implementing IPT solutions. Along with delivering the same or better quality and reliability as traditional systems, IPT solutions offer distinct benefits including lower costs, simplified management and greater flexibility to add applications like conferencing, centralized voice mail, and unified messaging, enabling branches to deliver premium service to customers. IPT is able to lower the costs and provide value-added communications applications to employees in branch and retail locations. Supported network topologies: â€Å"Topology† refers to the configuration of the hardware components and how the data is transmitted through that configuration. 802.15.4 and ZigBee support three different network topologies: star, mesh, and cluster tree (also called star-mesh hybrid). The cluster tree topology is less efficient than the other two, and is therefore rarely (if ever) implemented. It is not covered in this whitepaper. Before describing the star and mesh topologies, it helps to first understand the different types of devices these networks can include. LAN guard N.S.S. has the ability to scan your entire network, IP by IP, or to scan just a single machine upon which it is installed. Not only do you get a list of open ports and vulnerable services, but you also get useful information such as the service packs installed on the machine, missing security patches, wireless access points, USB devices, open shares, open ports, services/applications active on the computer, key registry entries, weak passwords, users and groups, and more. In addition, you can easily analyze scan results using filters and reports, enabling you to proactively secure your network — for example, by shutting down unnecessary ports, closing shares, installing service packs. Bibliography: Search Engines Name: www.google.com www.yahoo.com www.ads.com ****** Web Address Name: http://en.wikipedia.org/wiki/VoIP http://en.wikipedia.org/wiki/Voice_over_Internet_Protocol http://en.wikipedia.org/wiki/IP_Phone http://en.wikipedia.org/wiki/Mobile_VoIP http://en.wikipedia.org/wiki/Comparison_of_VoIP_software http://en.wikipedia.org/wiki/Differentiated_services http://en.wikipedia.org/wiki/ENUM http://en.wikipedia.org/wiki/H323 http://en.wikipedia.org/wiki/Integrated_services http://www.manufacturers.com.tw/telecom/WirelessSolution.html http://www.redcom.com/products/slice2100.php http://www.redcom.com/products/hdx_apps.php http://meraki.com/oursolution/mesh/ http://www.microsoft.com/technet/network/p2p/p2pintro.mspx EIAAC http://en.wikipedia.org/wiki/Pager http://www.siemon.com/us/white_papers/03-10-10 ip_enhanced_medical.asp http://www.itl.nist.gov/div897/sqg/va/papers/appaper.html http://www.azgita.gov/councils_committees/tegc/submissions/10.pdf http://www.anesthesia-analgesia.org/cgi/content/full/100/2/506 ****** Books name: Book Name Writer Name Publication Name Computer Networks(4th edition) Andrew S. Tanenbaum Prantic-Hall India Enterprise Networking NCC Education Limited

Background of Circuit City :: essays research papers

  Ã‚  Ã‚  Ã‚  Ã‚  Circuit city was founded in 1949 by Samuel Wurtzel under the original name or Ward’s. Due to Wurtzel’s business skills, President Kennedy appointed him to the U.S. Foreign Trade Mission to Switzerland and Austria. Originally opened as a television store, Circuit City has come to sell almost all electronic goods ranging from television and video products to cell phones and car stereo equipment.   Ã‚  Ã‚  Ã‚  Ã‚  Circuit city competes in a consumer electronic market. The main competitors of Circuit City are Best Buy, Comp USA, Wal-Mart, RadioShack, and Amazon.com. Second in sales in this industry, Circuit City operates more than 600 stores nation wide and an additional 1,000 stores in Canada under its subsidiary InterTan Inc.   Ã‚  Ã‚  Ã‚  Ã‚  While Circuit City normally sells a wide variety of products from different companies, in 2004 it stated carrying their own product line. This line includes LCD computer monitors through their Liquid Video brand, other consumer electronics through Verge, and easy, simple, affordable products through ESA brand.   Ã‚  Ã‚  Ã‚  Ã‚  Circuit city grew rapidly between the 1960’s and 1980’s. During the 1990’s the sales rate leveled off and in 1999 their revenue passed the $10 billion mark. They have been trying to revitalize the chain by eliminating certain products, such as appliances, and by lowering operating costs. Currently Circuit City is at a maturity level with declining sales and revenue. Over the past 55 years Circuit City has transformed from a small local television store to an international chain of superstores. Circuit City will continue to be a competitive company in the consumer electronics industry as long as they offer a strategic plan that leads to larger sales.

Digging Seamus Heaney was born on April 13, 1939, on a farm in Essay ex

Digging Seamus Heaney was born on April 13, 1939, on a farm in Castledawson, County Derry, Northern Digging Seamus Heaney was born on April 13, 1939, on a farm in Castledawson, County Derry, Northern Ireland, the eldest of eight children. In 1963, he began teaching at St. Joseph's College in Belfast. The first poem I’ll be looking at is ‘digging’ it was written in 1966. The poem consists of 9 stanzas that vary between two lines and five lines in length. There is no pattern to the stanzas, perhaps to reflect the idea that there is no pattern or predictability to our memories. In the poem there is quite a variation in the language e.g. the title is blunt. It is only when we have read the poem carefully that we realise that all three generation are involved in digging: his grandfather dug turf, his father dug up potatoes, Heaney is digging up his memories and his past. There is quite a lot of words ending in ‘ing’. ‘Digging’ ‘Rasping’ and ‘Slicing’ this gives the poem a feel of action like your actually there. It gives the reader the effect of being there seeing it hearing it smelling it almost touching it. It gives the poem a certain flow, the poem doesn’t start and stop it flows from one stanza to another. The poem begins in the present tense as Heaney describes seeing his elderly father straining among the flowerbeds, then goes into the past tense when he remembers his father and grandfather at work. The last two stanzas return to the present, when Heaney realises that his work is to write. The final line, however, is in the future tense, to emphasise Heaney's determination ‘I’ll dig’. He then describes his father and his grandfather as they work, he describes to us their movements and... ...e. It repeats the opening lines: 'Between my finger and my thumb The squat pen rests.' Yet the gun image is replaced by 'I'll dig with it.' His pen becomes a metaphorical spade. This suggests that his pen is his tool, just as the spades were tools for his father and grandfather. It also suggests that Heaney wants to 'go back to his roots’ to dig into his past through his writing. There is a lot of repetition in the poem, the words â€Å"dig’ and â€Å"digging† are used. This shows the importance of digging, for peat and potatoes, it also show how it is part of his families heritage and has been going or generations. A few lines near the beginning of the poem have fairly conventional rhymes: thumb/gun, sound/ground/down; thereafter the poem is unrhymed, though there are repeated sounds such as the echoing ing sounds in 'nicking and slicing neatly, heaving sods'

Object-oriented Programming and Recommendation Summary

Clark College of Science and Technology SNS Bldg. , Aurea St. Samsonville Subd. , Dau, Mabalacat, Pampanga A project study presented to the Faculty of the Computer Programming In partial fulfillment of the requirements For the title of Object Oriented Programming Language Tungol, Axel-Yor Gomez, Christallane Velarde, Patrick John Santos, Renato Astraquillo, Angelo Clark College of Science and Technology SNS Bldg. , Aurea St. Samsonville Subd. , Dau, Mabalacat, Pampanga A project study presented to the Faculty of the Computer Programming In partial fulfillment of the requirements For the title ofObject Oriented Programming Language Tungol, Axel-Yor Gomez, Christallane Velarde, Patrick John Santos, Renato Carino, Joy Valerie Astraquillo, Angelo AKNOWLEDGEMENT DEDICATION TABLE OF CONTENTS CHAPTER I: Project and Its Background Introduction Theoretical Framework Conceptual Framework Statement of the Problem Objectives of the Study Significance of the Study Scope and Delimitation CHAPTER I I: Review on Related Literature Review on Local Literature Review on Foreign Literature CHAPTER III: Research Design and Procedures Research Methodology Research Instrument Context Diagram Zero Diagram Data Flow Diagram System RequirementsCHAPTER IV: Photographic Documentation Screenshots Description and Codes Database Table Project Schedule CHAPTER V: Summary, Conclusion and Recommendation Summary Conclusion Recommendation FIGURES Figure1Context Diagram Figure2Zero Diagram Figure3Data Flow Diagram Figure4Splash Form Figure5Log-In Forms Figure6Main Menu Figure7Farrowing Schedules Figure8Pay Roll CHAPTER I INTRODUCTION PROBLEMS AND ITS BACKGROUND DCTHILLSFARM is a farm bought by Domie C. Tungol and Erlinda V. Tungol in year 1998, located in Sapang Bato, Angeles City. DCTHILLSFARM’s business just got approved and it needs a system for it to start.Surely because of the news that DCTHILLSFARM is going to start its business, many people will want to join, and it will need a system to keep track of the employees and their payroll. Because the business is just about to start, there’s yet is no system for the farm to use. Through studying the problem, the researchers came up with an idea to make a computerized payroll system with a special feature that helps the farm keep track of the farrowing schedules of the pigs. SYSTEM REQUIREMENTS Minimum Hardware Requirements: Processor: Pentium IV or Higher Hard Disk: 80 GB or HigherMemory: 512 MB or Higher Monitor: SVGA Monitor (800Ãâ€"600 and 32-bitcolor) Keyboard: Standard Keyboard Mouse: Optical Mouse Printer: Printing Device (Ink Jet / Dot Matrix) Software Specification Operating System: Microsoft Windows XP or Higher Application Software: CHAPTER V SUMMARY CONCLUSION AND RECOMMENDATION SUMMARY CONCLUSION RECOMMENDATION THEORETICAL FRAMEWORK Now a days, technology became very essential in all establishment. From the early days, people are capable of using pens and papers on their daily dealings. The transfo rmation of this setup improved because of the different technologies.Computerized Payroll system is an application that will help the DCTHILLSFARM’s to keep track of the payroll of its employees. The system can be useful in computing the payroll of the employees especially to the owner it minimize their works. CONCEPTUAL FRAMEWORK The researchers of the study are developing a kind of proposal, which is the Computerized Payroll that can easily compute the salary of the employees to make their works easier and more accurately. In order to solve the problem of the DCTHILL’SFARM’s, the people behind the study gathered information on how these things to be done.The system can be useful in computing the salary of the employee especially to the owner it minimize their works. STATEMENTS OF THE PROBLEM The study seeks to find solution and betterment with the manual payroll. Because of the said system, problems occur. GENERAL PROBLEM The manual payroll system of the DCTHI LLSFARM’s makes the owner more stressful, sometimes they created Human errors in computing the salary of their employee and the works of the owner are process in a slowly manner. SPECIFIC PROBLEM * Difficulty in Computing Because of the manual system the owner is having difficulty in computing the salary of the employees one by one. Time Consuming Through the manual system, the owner consumes time in computing all of the salary of the Employees OBJECTIVES OF THE PROBLEM GENERAL OBJECTIVES SPECIFIC PROBLEM * Rapidness in Process * Easy in Computing * Less Consume in Time SIGNIFICANCE OF STUDY TO THE STUDENTS TO THE TEACHERS TO THE SCHOOL TO THE FUTURE RESEARCHERS SCOPE AND DELIMITATION SCOPE DELIMITATION CHAPTER II REVIEW ON LOCAL AND FOREIGN LITERATURE REVIEW ON LOCAL LITERATURE REVIEW ON FOREIGN LITERATURE CHAPTER III RESEARCH DESIGN AND PROCEDURES RESEARCH METHODOLOGY RESEARCH INSTRUMENT

Judgement Day

â€Å"First of all, let me apologise for our pathetic performance against Crystal Palace. Enough has been said about that already, and now we must focus positively on this afternoon's match. It's a game we must win, and then keep or fingers crossed about the eventual outcome. I don't want to think about the unthinkable. † The colourful, shiny programme I held in my hands trembled as I read this. It was from the weekly interview with the Portsmouth F. C. manager, Graham Rix. It sounded a long way away from the cool and collected manager, who had denied all problems and remained optimistic until this day. For you see, this was no ordinary day, no ordinary Saturday match for the inhabitants of the bustling south coast city of Portsmouth. This was like something out of a cheesy American movie. It was the last day of the season and, as they had been forced to do four times in the last six years, Portsmouth had to win to stay in the division. It was their own fault really, as many a Pompey fan would admit. They had spurned their chance to escape this last day nerve-jangler only three days prior to this momentous day. The chance had arisen when they played Crystal Place, the team one place below them, the place feared by managers and fans alike, the final relegation place. It had been a cold, damp night at Fratton Park, and yet still, the Pompey faithful wore only the shimmering blue and gold shirt, onto which, the Portsmouth badge was stitched. They had turned out in there hoards, believing this would be the night when our troubles came to an end, and after which we could relax, safe in the knowledge that we would remain in Division One for at least one more year. It was evident as the match kicked off that all was not well, as Palace stroked the ball around the park with ease, confident in their own surviving ability. This confidence paid off, and, within the first ten minutes of the match they had scored. They kept going, and by half time they were leading the uncomfortable looking ‘royal blues' 3-0. The rot continued, and despite a bright spell of ten minutes, in which they clawed it back from the brink to 3-2, the final score was one of woe for Portsmouth. The match finished 4- 2, with Portsmouth playing abysmally, and giving themselves a severe up hill struggle, needing to win by two or more goals on the last day, against a strong Barnsley team, whilst also counting on Crystal Palace or Huddersfield to lose. The crestfallen fans trudged home, pouring into the gloomy streets, no doubt feeling as bad as the dire weather. There were mutterings of discontent all over the town, about the manager, about the team, and most worryingly, about the future. It was obvious to me, from his emotional spill in the programme, that Rix had also felt this bitterness as he left the stadium. It was this I hoped, as I moved along with the surging mass of blue, that would keep us up, that finally we had a manager who cared about the team, not just his bank account. I noticed that, alike the sea of friends I did not know, I had been overtaken by a strange numbness, a sort of hollowness, which rendered me unable to speak or sing along with the rest. As I handed my ticket to the collector upon entering the lower east KJC stand, he seemed to notice my nervousness, and gave me a wink or reassurance, and told me it would be ok. This went a great deal to settling my nerves, but it was not nearly as soothing as the great roar that greeted me, as I stepped out from the stairs to find my seat, sifting through the cheering fans. It was quite simply breath taking; in all my life I am unable to recall another time when I had received such a rush of adrenaline. After taking to my seat I soon joined in with the familiar chants that had graced the ground for decades before, and lost my already quivering voice in the process. Then, the place went silent, as our chairman, Milan Mandric came out of the tunnel, looking as anxious as we all felt. He made a speech, which reverberated over the ancient tannoy, shaking the stands. He reassured us that this team was his heart, and we, were his blood. We were, in his eyes, the best followers he could have hoped for, and he then thanked us for coming, and made his way up the stairs of the stand, and sat down among the fans, much to their delight. The team then crossed the threshold of the tunnel, and entered the hallowed turf of Fratton Park to a standing ovation. It was the biggest game of their lives, but they did not show it, warming up as usual, and signing autographs for the children. Then, as they stripped from their training kits to reveal the kit, that every young boy from the area dreams of putting on, the ground seemed to take on an eerie silence. This continued for a few more minutes right up to the start of the match, when only then it was broken by the referees whistle, signifying one of the most important games in the history of the club, and certainly the most important in my short lifetime. This was it! This was the match! All of 16,000 people, the capacity crowd at Fratton Park held their breath, said their prayers, and hoped that after the ninety minutes had ended they would be cheering again. As the whistle sounded the crowd exploded into noise, with the fans hollering out the traditional morale boosting songs, unique to Portsmouth. Barnsley didn't know what hit them. From the start they faced wave after wave of attack from the blend of youth and experience that was the Portsmouth team, most of which broke onto the defensive rock that was Darren Barnard, the Welsh international. Then, as time went on the constant pressure applied from Portsmouth began to show, the lackadaisical Matt Appleby pondered too long on what to do next and was caught in possession by the energetic local boy, Gary O'Neil. He powered his was down the wing, and swung in an accurate, curling cross. This was met by the huge frame of die-hard Portsmouth fan and player Lee Bradbury, who powered the Blues into the lead by steering the ball past the hapless keeper, Kevin Miller, into the net. Before the ball had even touched the floor the crowd were on their feet, sheer jubilation running through them, as they hugged strangers, and friends alike. They could sense something special was on the way. I leapt up from my seat, throwing my programme to the floor, and cheered all I could, losing my voice, which I had only just regained. Among the crescendo of clapping and cheering the game had already started again. There was a buzz among the crowd, as the players in blue seemed to swarm the ill-fated Barnsley defence, pouncing on every mistake. After a swift attack in which Barnsley committed many men forwards, Portsmouth broke, tearing up the field, sweeping the ball from left to right. Lee Sharpe came up with it, on the left flank, and violently lashed it centrally, towards the advancing run of Gary O'Neil. The wayward defence watched, as he cut through them expertly, until he had a clear chance at goal. I was amazed at his composure, as most experienced players would, by now, just have belted it goal bound and hoped for the best, but O'Neil calmly and collectedly dinked the ball over the advancing keeper, and landed it in the far corner of the goal, where it rolled over the line. The crowd again detonated a chorus of cheers and clapping. O'Neil ran over to the crowd in celebration, and was instantly mobbed by the devotees, who were restrained by the stewards, who themselves were in a jubilant mood. All around me I could see happy faces, it was not their dream come true, but their nightmare vanquished, and I revelled with them in delight. It was, in hindsight, a little presumptuous of us though, to have celebrated already, as there was still another half to go. The first half in fact drew to a close with the booking of Bruce Dyer, who was beginning to get frustrated by the constant badgering from the home supporters. At half time the multitude of persons arose, and filed off, to get their customarily dodgy half time snack, of pies, tea and chocolate. Whilst down there though, many people began cheering, for what seemed like no reason, but then it was made public over the tannoy that at that specific moment in time both Huddersfield and Palace were losing, and if all stayed as it was we would stay up. Still, I was worried, football is a cruel game, and Portsmouth had been known for conceding late goals, costly ones. As I stepped back out onto the terracing I glanced around at the surroundings. It was an ocean of blue, shone upon by the sun, on a hot May afternoon. It all seemed calm, all problems washed away, knowing that we were all in this together, and that, come rain or shine, we always would be. It was a touching moment I can assure you. The next half continued as the first half finished, which was brilliant from our point of view, as we had been playing out of our socks for the first 45 minutes. The players had obviously deliberately not been told about the results elsewhere, as they still set about their task with a great sense of urgency, giving their all. The more and more we attacked the more defiant Barnsley became, and soon the constant failure of all of Portsmouth's attacks began to frustrate some of the Portsmouth players. What happened next horrified the Pompey faithful, as an off the ball argument soon developed into a brawl, in which Shaun Derry crudely head-butted Barnsley's captain Neil Shipperly, breaking his nose. For this pointless act of violence Derry was rightfully dismissed, and even the bluenose Portsmouth fans did not complain. Whilst Shipperly was replaced by Rory Fallon, Portsmouth adjusted their formation to cope with being a man down. There were whispers behind me that this was the changing point, and that all our good work had been undone. It was a worrying time to be a fan, and the jitteriness of the crowd returned. But my worries were soon quashed, as Portsmouth seemed not to be affected by their numerical disadvantage, and played some lovely flowing football, all applauded riotously by the fans. It was a long period of sustained build up play that led to the third goal. The ball had been played backwards, and forwards, as Portsmouth, instead of launching high balls over the top, decided to probe their opponents, and retain possession. This worked a treat, as a great link up between O'Neil and Mills put through Bradbury, who, with endless space took the ball cheekily around the keeper, and slotted the ball home, into the unguarded net. Barnsley were broken, their spirit crushed, they had been out played in every dimension and they knew it. The crowd also knew it, and sung out in great approval, as the minutes passed by at a snail's pace. After what seemed like an eternity the referee began to look down at his watch. At this the Portsmouth fans prompted him by whistling to a deafening pitch, and after two more minutes of this the referee, who had performed well, blew for time. For a second there was silence, an aura of disbelief swept over the stands. I stood there taking it all in, pinching myself, aware that I had just been privileged enough to witness one of the greatest moments in the clubs' history. My train of thought was broken, by the rather poignantly apt ‘Great Escape' theme being blasted out of speakers all around the ground. The crowd got their voice back again, and scenes of celebrations soon followed. I was swept along, on a wave of euphoria with the crowd onto the pitch, where the players were lifted high above the heads of the crowd, on their shoulders. Flags were hoisted up around the ground, and the news cameras were all over the place, interviewing fans, interviewing players. I came upon one interview with the relieved Graham Rix. On one of the greatest days of my life, I stood there, listening to what he had to say, along with a great number of fans, who waited to congratulate him after. His words at first were serious, stating, that ‘this would never happen again. ‘ How many times I had heard that in the last six years. But there was something about this man, something different. He cared. We all knew it, and we all knew that he would do everything in his power to keep his promise. His next words struck a particular chord with me, and have stuck with me ever since. His face changing from one of happiness to one of ambition, as his delivered his final words, ‘just think how those fans would have reacted if we could really give them something to celebrate! ‘

Cross Contamination Example Essay

There are 3 different types of contamination in the food industry; microbial contamination, physical contamination and chemical contamination, with microbial contamination being a more frequent cause of food poisoning and rising, with the amount of products contaminated having seen 91 % between 2006 and 201 1 (Department for Environment, Food and Rural Affairs , 2012) . A variety of things can cause microbial cross- contamination, but the most common causes are through vehicles or vectors carrying harmful bacteria (pathogens) from a source to the food.The source or reservoir is where the contamination Originates from, for example, humans, raw food, rodents, dust and soil. In the context of cross- contamination, a vehicle is a substance, object or living thing that moves the contaminant away from its source to the food. The vehicle could either be dictionary or a mobile vehicle. A vector is an organism, usually a bird or an insect, that transmits a pathogen from one place to another. The aim for a food manufacturer is to make a commercially sterile, not completely sterile.The definition for a commercially sterile product is â€Å"Commercial sterility of food means the conditions achieved by application of heat which renders such food free from microorganisms capable of growing in the food at temperatures at which the food is likely to be held during distribution and storage. † (Food and Agriculture Organization, 2007). The reason for this is that he severe thermal treatment needed to make a product completely sterile would severely reduce the sensory quality and nutritional value of the product, as well as increasing the energy consumption to reach higher heats.There are various reasons as to why cross-contamination happens and is a major cause of food poisoning, for example, poor hand washing techniques, confusion of terminology by staff, equipment design and color coded equipment which people do not adhere to. It is also very difficult to track down the causes of an outbreak, so it may take a while to take the relevant assure to stop the outbreak and sometimes the wrong thing is blamed, for example, in 2011 , Spanish fruit and vegetables were blamed for an E. Coli outbreak across Europe, killing 22 people.However, it was later discovered that German bean sprouts were the likely cause (BBC News, 201 1). The mistake cost the Spanish fruit and vegetable industry Emma per week, proving how economically important it is to get the causes right (BBC News, 201 1). In many food poisoning cases, a sequence of events contributes to an outbreak, rather than just one activity alone. This is called the microbial chain ND makes it even harder to discover the true cause Of an outbreak. An example of a microbial chain is; cooked ham comes into a store and is sliced.This ham has come from the supplier contaminated so has now contaminated the slices used. The slices is not washed and other meats, for example, more cooked ham or cooked beef, is slice d on it. This then causes the other meats to become contaminated, making it difficult to find the meat that originally caused the problem. The cooked meat that has been contaminated is ready to eat, so therefore is a high risk product as no further retirement will be done to kill pathogens, meaning it is very likely that a case of food poisoning would come from this microbial chain if the pathogen was harmful enough.A wide range of things can act as vehicles for microbes, for example, hands, clothes, cleaning cloths and pests can all act as mobile vehicles, and food- contact surfaces, food itself and hand-contact surfaces, such as door handles, fridge door and taps, can all act as stationary vehicles. These vehicles can carry pathogens onto high risk foods such as ready to eat products such as, cooked meats, cooked prawns, oysters, and dairy products. A high risk food can be defined as â€Å"any ready-to-eat food that will support the growth of pathogenic bacteria easily and does n ot require any further heat treatment or cooking'. Warwick University , 2011). This means that special care needs to be taken preparing these foods in the factory or in the kitchen, for example, using separate areas in the factory or using separate chopping boards for raw and cooked meat in the kitchen. There are many laws that have been put in place to try and prevent cross-contamination, therefore reducing the frequency of major food poisoning outbreaks. These laws can be found in SEC) 852/2004 Hygiene of Food Stuffs and it is the job of environmental health officers to enforce these laws, through audits.This laws have been changed and updated over time since 2004 to make them more relevant and applicable. A public enquiry on the 2005 E. Coli 0157 outbreak in South Wales, chaired by Hugh Pennington, a professor Of bacteriology, helped further improve this piece of legislation when it was published in 2009. However, many find these difficult to interpret and use in the context of t heir own business, so the Food Standards Agency created Safe Food Better Business', tit different sections for different types of companies that handle food, for example, for caterers, takeaways, retailers, child minders and care homes.These documents are also provided in different languages to help provide businesses, run by foreign owners who don't speak English, improve the safety of the food from the business and help them adhere to the laws in (SEC) 852/2004, therefore reducing the risk of an outbreak occurring through cross- contamination from this business. There are many examples of where cross- contamination has been the probable cause of major food poisoning outbreaks, for example, an outbreak of Weston Blumenthal ‘The Fat Duck' restaurant in 2009, the E. Oil 0157 outbreak in in 2005 in South Wales and an E. Coli outbreak in Lancashire, Scotland in 1996. The 2005 outbreak of E. Coli 0157 in South Wales was a major outbreak and lots of mistakes were made for it to occ ur, which were highlighted in the Pennington Report. In the outbreak, 157 cases were identified, 31 people admitted to hospital and 1 five year old boy died. This prompted a public enquiry carried out by a Professor in Bacteriology called Hugh Pennington.The problems identified were; poor audits carried out by Environmental Health Officers at John Tudor and Son, critical control points not met, no valid ‘Hazard Analysis and Critical Control Point' (HACK) plan and issues with cooked meat being prepared and packed in the same area as raw meat, therefore causing cross-contamination (Pennington, 2009). The meat also ending up in schools in the area, meaning smaller children with weaker immune systems were more at risk of becoming infected, so they were more vulnerable to serious illness and death.One cause of the outbreak was that there was only one Vic packer, which are used o vacuum pack a product, was used for cooked and raw meat, causing any pathogens that were on the raw meat to contaminate the Vic packer, which then contaminated the cooked meat. This then became the problem as the cooked meat will not be treated again, so there is a good chance that a harmful level of pathogens will be present in the meat when consumed.Environmental health officers that had inspected the premises had noticed that there was only one Vic packer for both, however the Food Business operator had told that they had another Vic packer that was of site for repairs. This turned out to be a lie and could have easily been detected, had the inspector enquired further and asked for proof, however it was only discovered to be not true at later inspection. In the Pennington Report it states that ‘special attention' was paid to the Vic packer and that ‘the use of one for both raw and cooked meats carried with it a serious risk of cross- contamination'.

Investigating Financial Control Essays

Investigating Financial Control Essays Investigating Financial Control Essay Investigating Financial Control Essay The business Ill be examining and find out their objectives and aims is Sainsbury. Sainsbury is a retail store that was founded in 1869 by John James and Mary Ann Sainsbury and it is Britains longest-standing major food retailing chain. They opened their first small dairy shop at 173 Drury Lane, London. Drury Lane was one of Londons poorest areas and the Sainsburys shop quickly became popular for offering high-quality products at low prices. It was so successful that further branches were opened in other market streets in Stepney, Islington and Kentish Town. In addition, their head office is in J Sainsbury plc, 33 Holborn, London, EC1 N2HT.By 1882, John James Sainsbury had four shops and had plans to expand his business further. He opened a depot in Kentish Town, north-west London, to supply this growing chain and, on the same site, built bacon kilns that produced the first Sainsbury brand product. It was also in 1882 that John James opened his first branch in the prosperous suburb o f Croydon. This shop sold a wide range of high-class provisions and was more elaborately decorated than the earlier shops. However, between 1890 and 1900 the number of Sainsburys branches increased from 16 to 48.In addition to a wide range of quality food and grocery products, many stores offer bread baked on the premises, delicatessen, meat and fish counters, pharmacies, coffee shops, restaurants and petrol stations. There are over 14 million people that shop at Sainsburys supermarkets regularly and there are 721 stores throughout the UK. Over 10.3 million aluminium cans are recycled at Sainsburys stores each year along with 22,000 tonnes of glass.J Sainsbury plc is one of the UK and USs leading food retailers with interests in financial services and property. Sainsburys is the parent organisation controlling these operating companies and they are:* Sainsburys supermarkets* Sainsburys bank in the UK* Shaws Supermarkets* Star Market in the US* Sainsburys Development* Sainsburys prop erty companySainsburys goal isTo deliver an ever-improving shopping experience for customers with greater product at fair pricesSainsburys mission isTo be the consumers first choice for food, delivering products of outstanding quality and great service at a competitive cost through working faster, simpler and togetherSainsburys has got a lot of different aims. One of the aims is:* To exceed customer expectations for healthy, safe, fresh and tasty food making their lives easier every day.Sainsburys has also got a lot of different objectives. One of the objectives is:* To meet customers needs effectively and in addition provide shareholders with good, sustainable financial returnsSainsburys main products are supermarket/grocery products, retail banking services, and retail property development services. Sainsburys are committed in providing food at the highest quality that is not only delicious but also safe for everyone. The range of customers is the public; it is a store that is ope n to everyone. Sainsburys sells almost all types of products, for example:* Milk* Bakery products* All types of food* Toiletries* Canned food, etcSainsbury provides employees with a stimulating and well-equipped working environment. According to one of the departmental head, he stated that Making teamwork work should be the goals of a lot of organisations in order to make use of all employees strengths to improve the organisation as a whole.TransactionsIs a method of buying or selling goods and it could also be a way of purchasing money from one person to another. It can also be a technique of transferring services from one business to another.Transaction from customersThere are different ways in which customers purchases their goods. It could either be by cash and debit or credit card. Furthermore, most customers pay by debit or credit card because they feel more convenient and they could always get limited cash from the store when they are paying for their shopping and then the st aff records it on to the till and also their receipt.Transaction Manual recordingThis is when a ccutomer purchases goods from the store and then he/she pays by credti or debit card. After paying for the items with the credit or debit card, the customer recieves a receipt to sign and then when he/she signs the receipt, the staff checks the receipt with the card given by the customer to be sure its the right signature and the signed reciept is being kept with other customers receipt. However this is copy of the store and everything is being recorded at the end of the day.Transaction Electronic recordingIf a customer made purchses with cash, credit or debit it is automatically registered in the cash register and this is recorded electronically. This process is easy because at the end of the day the business would know how much money theyve made and they could easily retrieve information on the system for future references.The effectiveness and security of recording transaction mauall y and electronicallyManual recording is effective because its way of recording transaction easily and faster by customers purchasing items from the store. In addition, all the receipts should be kept for future references at the end of the day and they should be stored in a safe and dry place.Manual recording is not secure due to some certain reasons like if:* Customers reciepts could be lost.* Receipts may not be handled with proper care, that is, a staff could put it in the bin without taking note that it is still a receipt that could be useful for the future.* Time is being wasted because it takes a lot of time to record transaction of customers.* Receipts could get wet mistakely by staff.* Staff could forget to record transaction.Electronic recording is effective because it saves a lot of time. Whenever a transaction is made it is automatically recorded on to the main system. In addition, customers see how much theyve spent whenever a transaction is being processed for them.Elec tronic recording is not secure because when the system crashes, most of the transaction information being recorded could be lost. When typing in the payment made by customers, the wrong amount of money could be recorded and this could lead to difficulty when trying to retrieve customers payments on the products purchased from the store.Task 2They are different ways in which fraud could occur in Sainsburys and they are:* Fraud could occur in this business when any of the staff gives out the security code for some certain information.* Fraud could take place when a staff obtains money from the company, cashier or till.* When some basic equipments or products are being taken out without anyone knowing.* When purchases made by customer, purchases made by staff and sales to customers are not recorded.* Fraud could occur when a staff gives out a product to family, peers without payment.* When customers or staff walks out from the store with some certain products without paying.* When staf f or customer eats or drinks a certain product form the store without payment.* Fraud could occur when staff doesnt record a purchase made by customer.* It could occur when prices of products are beind reduced for some family or peers without recording.* Where the companys equipment is used for inappropriate personal use or log in to some confidential information, e.g. access to the computer and the changing some information on spreadsheets or database.Task 3Prevention of fraud could be avoided in different ways in Sainsburys and they are:Fraud monitoring serviceIf Sainsburys staff sees unusual transactions appearing on a customers card and become suspicious that someone is using his/her card or card details without the customers knowledge, Sainsburys company would as soon as possible to check whether the customer made the recent expenditures. The business organisation has also a contact number to call in case of any fraud, which is 0845 355 0866.Free online guaranteeIf a transactio n is using a customers details and has been carried out on the Internet without the knowledge or consent of the customer, Sainsburys organization take this case serious by providing a free online guarantee to safeguard against malicious card use.Chip and PINAs in this modern time, there are all new credit and debit cards, customers Sainsburys Bank credit card comes with the added security of Chip and PIN. This is a simple way to pay for shopping that doesnt involve signing a receipt. When paying for something, the customer needs to have or do is entering a 4-digit personal identification number (PIN) this is just as using a cash machine. This is a PIN that will be personal to the customer; it will make counterfeiting almost impossible, keeping all customers transactions secure. All customers can change their PIN to make it easier to remember or if anyone knows their PIN and they want to change it for security. If a customer wants to change his/her PIN, they could visit any Sainsbur ys Bank, Halifax or Bank of Scotland cash machine and simply follow the on screen instructions.Sainsburys strongly advise that customers never write down or tell anyone their credit card PIN number. In addition, customers should never give their card, or card number, to anyone unless they are giving them payment details. There is also a contact number, which is 0845 300 0344* in case a customer thinks anyone is in a position to use their card without their permission.Public ActionThe company encourages members of the public or staffs that if they presume fraud and corruption, they should contact anyone in a higher rank in the store, that is the Chief Executive, Manager or security.My source of information was from www.sainsburybank.co.ukFraud could also be prevented through this ways too, which are:o Staffs are trainned on how to recognise shop lifters.o CCTV cameras are being installed.o Before employees are employed, their personal record are being checked for any criminal record before they are employed.o Security gaurds.o At the start and at the end of sales for the day, stock are being doubled checked in order to make sure everything is in perfect and not missing.This is an appendix of Sainsburys group profit and loss account to show how much the business has gained and lost through sales.